44
EN
31. Oktober 2016
14:22:38
3
31. Oktober 2016
14:22:38
3
By several cabins connected to the control panel (providing they
have been connected and programmed correctly) the multi-cab-
in control symbol will appear on the display in the bottom line:
3
The number inside this symbol indicates the number of the
currently selected cabin.
Before you can start using a new cabin you have to
complete the basic setup, as described in the chapter
“first start and commissioning”.
A not yet set up cabin will be shown in the overview in-
terface with the symbol of a “wrench”. Touch this cabin
in order to launch the setup and configuration.
Navigation between connected cabins:
•
Use the wiping motion gesture left / right from one
display side to the other to go to the next cabin.
•
In the cabin overview interface touch the required cabin image to jump to its interface directly.
•
To open the cabin overview interface, touch shortly the symbol
3
How to control a connected cabin
Select the cabin as described above. Once you are in its interface you can control it and make set-
tings. All settings done here will apply to the current cabin only.
How to control all connected cabins at once
Open the cabin overview interface. Now you can start/stop all cabins at once if you press on the
on/off button (>3 sec). Switching on effects with a second delay (cascade) for all cabins. All settings
made in the cabin overview (e.g. language change) will apply to all connected cabins.
Notice
: Switching off from the overview interface will fully stop all cabins at once. After-heating
or fan operation after the main heating will be disabled. This function acts as “full stop at once”.
Error messages and warnings
If there is a fault in one of connected cabins a red warning triangle will appear in the bottom line
on the screen. Go to the cabin overview - the cabin with the fault will be shown with such triangle
flashing over its image. Touch this cabin image shortly to go to this cabin - the fault details will
be displayed on the screen (text message and symbol). A fault in one cabin will not interrupt the
operation of the other cabins.
Operation interface by multi-cabin control
How to select a cabin, navigation between cabins, setup and operation
Example: Steam cabin
Example: Sauna cabin
