enertexbayern Enertex KNX Smartmeter 85A (RT), Manual And Configuration, Page: 59 / 69

Handbuch-KnxSmartmeter-85A-en-3.odt, 2018-10-04 Seite 59 von 69
Counter value of the balancing active energy counter of channel 2. The counter can be positive or negative. If the
value is negative, then the generated power was greater than the consumed energy.
ID Name Object function Length Type Flags
80 Energy counter
Ch2 Active energy counter (con.) 4 Byte [13.010]
DPT_ActiveEnergy CR-T-
Counter value of the active energy counter (consumption) of channel 2. This counter value is always positive or 0.
ID Name Object function Length Type Flags
81 Energy counter
Ch2 Active energy counter (gen.) 4 Byte [13.010]
DPT_ActiveEnergy CR-T-
Counter value of the active energy counter (generation) of channel 2. This counter value is always negative or 0.
ID Name Object function Length Type Flags
82 Energy counter
Ch2 Reset counters 1 Bit [1.017]
DPT_Trigger C-W--
The three counter values (balance, consumption and generation) can be reset to 0 via the group object.
ID Name Object function Length Type Flags
83 Energy counter
Ch3 Active energy counter (bal.) 4 Byte [13.010]
DPT_ActiveEnergy CR-T-
Counter value of the balancing active energy counter of channel 3. The counter can be positive or negative. If the
value is negative, then the generated power was greater than the consumed energy.
ID Name Object function Length Type Flags
84 Energy counter
Ch3 Active energy counter (con.) 4 Byte [13.010]
DPT_ActiveEnergy CR-T-
Counter value of the active energy counter (consumption) of channel 3. This counter value is always positive or 0.
ID Name Object function Length Type Flags
85 Energy counter
Ch3 Active energy counter (gen.) 4 Byte [13.010]
DPT_ActiveEnergy CR-T-
Counter value of the active energy counter (generation) of channel 3. This counter value is always negative or 0.
ID Name Object function Length Type Flags
86 Energy counter
Ch3 Reset counters 1 Bit [1.017]
DPT_Trigger C-W--
The three counter values (balance, consumption and generation) can be reset to 0 via the group object.
ID Name Object function Length Type Flags
87 Energy counter
three-phase Active energy counter (bal. 4 Byte [13.010]
DPT_ActiveEnergy CR-T-
Counter value of the balancing active energy counter of the three-phase values. The counter can be positive or
negative. If the value is negative, then the generated power was greater than the consumed energy.
ID Name Object function Length Type Flags
88 Energy counter
three-phase Active energy counter (con.) 4 Byte [13.010]
DPT_ActiveEnergy CR-T-
Counter value of the active energy counter (consumption) of he three-phase values. This counter value is always
positive or 0.
ID Name Object function Length Type Flags
89 Energy counter
three-phase Active energy counter (gen.) 4 Byte [13.010]
DPT_ActiveEnergy CR-T-
Counter value of the active energy counter (generation) of the three-phase values. This counter value is always
negative or 0.
Enertex ® Bayern GmbH – Ebermannstädter Straße 8 - 91301 Forchheim - Deutschland - mail@enertex.de