Handbuch-KnxSmartmeter-85A-en-3.odt, 2018-10-04
Seite 35 von 69
Settings under the tab „Measurement channel 1,2 or 3 (Part 1)“:
Figure 27: Parameter measurement channel 1 (Part 1)
Description of the parameters:
Name
Options
Description
Transmit power and voltage measurements
cyclically
[Yes/ No]
The parameters for cyclical transmission are
hereby released.
Transmit measurements cyclically (x10s)
[0,1,2...17280, 0 =
not transmit
cyclically]
The group objects with the measured values for
active-, reactive-, apparent power and voltage of
the channel 1, 2 or 3 are transmitted cyclically at
intervals of the parametrized value.
Transmit active power cyclically
[Yes/ No]
It is set whether the measured value for the
above-mentioned cycle time is transmitted.
Transmit apparent power cyclically
[Yes/ No]
It is set whether the measured value for the
above-mentioned cycle time is transmitted.
Transmit reactive power cyclically
[Yes/ No]
It is set whether the measured value for the
above-mentioned cycle time is transmitted.
Enertex
®
Bayern GmbH – Ebermannstädter Straße 8 - 91301 Forchheim - Deutschland - [email protected]