Handbuch-KnxSmartmeter-85A-en-3.odt, 2018-10-04
Seite 50 von 69
Settings under the tab “Tariff 1, 2 or 3”:
Figure 37: Parameter Tariff 1
Description of the parameters:
Name
Options
Description
Rate (0.01ct/kWh)
[-10000,-9999... +10000]
The kWh rate of tariff 1, 2 or 3 has to be
specified.
Adopt rate from bus
[flighty / permanent]
The rate can be overridden by an object. The
rate adopted by the bus, can either be valid
only until the next reset or override the
configured value permanently.
Tariff changeover tariff 1(2 ,3
respectively)
[via tariff-time switch / via
triggering objects / always
active]
The tariff can be controlled either via the tariff
parameters (time) or trigger objects or always
be active. If “by trigger object” is selected then
the two group objects are enabled. With the
value “always active” no tariff switching takes
place. See section Tariff Costs Counter
Start (hour)
[0...23]
The hour of the commencement of tariff 1, 2
and 3 ,respectively.
Start (minute)
[0...59]
The minute of the commencement of tariff 1, 2
and 3, respectively.
Start (weekday)
[Mo/Tu/We/Th/Fr/Sa/Su/We
ekdays/Weekend/everyday]
The day of commencement of tariff 1, 2 and 3,
respectively.
End (hour)
[0...23]
The hour of the end of tariff 1, 2 and 3,
respectively.
End (minute)
[0...59]
The minute of the end of tariff 1, 2 and 3,
respectively.
End (weekday)
[Mo/Tu/We/Th/Fr/Sa/Su/We
ekdays/Weekend/everyday]
The day of the end of tariff 1, 2 and 3,
respectively.
Enertex
®
Bayern GmbH – Ebermannstädter Straße 8 - 91301 Forchheim - Deutschland - [email protected]