enertexbayern Enertex KNX Smartmeter 85A (RT), Manual And Configuration, Page: 55 / 69

Handbuch-KnxSmartmeter-85A-en-3.odt, 2018-10-04 Seite 55 von 69
Group object with the most recently determined apparent power of the channel 2.
ID Name Object function Length Type Flags
39 Measurement
Ch2 Reactive power 4 Byte [14.056]
DPT_Value_Power CR-T-
Group object with the most recently determined reactive power of the channel 2.
ID Name Object function Length Type Flags
40 Measurement
Ch2 Power factor 4 Byte [14.057]
DPT_Value_Power
_Factor CR-T-
Group object with the most recently determined power factor of the channel 2.
ID Name Object function Length Type Flags
41 Measurement
Ch2 THD-U 2 Byte [8.010]
DPT_Percent_V16 CR-T-
Group object with the most recently determined THD-U of the channel 2.
ID Name Object function Length Type Flags
42 Measurement
Ch2 THD-I 2 Byte [8.010]
DPT_Percent_V16 CR-T-
Group object with the most recently determined THD-I of the channel 2.
ID Name Object function Length Type Flags
43 Measurement
Ch2 Spectrum-U 14 Byte New dpt-Type.
have not been
released yet by
KNX CR-T-
Group object with the most recently determined values of the harmonics of the voltage of the channel 2.
Explanation see section Measurement quantities.
ID Name Object function Length Type Flags
44 Measurement
Ch2 Spectrum-I 14 Byte New dpt-Type.
have not been
released yet by
KNX CR-T-
Group object with the most recently determined values of the harmonics of the current of the channel 2.
Explanation see section Measurement quantities.
ID Name Object function Length Type Flags
45 Measurement
Ch3 Voltage (rms) 2 Byte [9.020]
DPT_Value_Volt CR-T-
Group object with the most recently determined RMS voltage of the channel 3.
ID Name Object function Length Type Flags
46 Measurement
Ch3 Current (rms) 2 Byte [9.021]
DPT_Value_Curr CR-T-
Group object with the most recently determined RMS current of the channel 3.
ID Name Object function Length Type Flags
47 Measurement
Ch3 Active power 4 Byte [14.056]
DPT_Value_Power CR-T-
Group object with the most recently active power of the channel 3.
ID Name Object function Length Type Flags
48 Measurement
Ch3 External active power limit 2 Byte [8.010]
DPT_Percent_V16 CRWT-
Limit value of the active power of channel 3. The value read is valid only if this object was written after a reset at least
once.
Enertex ® Bayern GmbH – Ebermannstädter Straße 8 - 91301 Forchheim - Deutschland - mail@enertex.de