Handbuch-KnxSmartmeter-85A-en-3.odt, 2018-10-04
Seite 39 von 69
Settings under the tab “Measurement three-phase values “ (Part 1):
Figure 29: Parameter Measurement three-phase values (Part 1)
Description of parameters:
Name
Options
Description
Transmit three-phase values cyclically
[Yes / No]
The parameters for cyclically transmission are
hereby released.
Transmit values cyclically (x10s)
[0,1,2...17280, 0 =
not transmit
cyclically]
The group objects with the measured values of the
three-phase variables are transmitted cyclically at
intervals of the parametrized value.
Transmit active power cyclically
[Yes / No]
It is set whether the measured value for the above-
mentioned cycle time is transmitted.
Transmit apparent power cyclically
[Yes / No]
It is set whether the measured value for the above-
mentioned cycle time is transmitted.
Transmit reactive power cyclically
[Yes / No]
It is set whether the measured value for the above-
mentioned cycle time is transmitted.
Transmit zero current cyclically
[Yes / No]
It is set whether the measured value for the above-
mentioned cycle time is transmitted.
Transmit unbalanced load cyclically
[Yes / No]
It is set whether the measured value for the above-
mentioned cycle time is transmitted.
Transmit power and current
measurements at change
[Yes / No]
The parameters for transmission at change are
hereby released.
Transmit measured values at change
(in % of current measured value)
[0, 1, ... 255]
The group objects with the measured values for
active, reactive apparent power and zero current are
transmitted on a change to the configured value.
Transmit active power at change
[Yes / No]
It is set whether the measured value is transmitted
when changing the above-mentioned percentage
value.
Transmit apparent power at change
[Yes / No]
It is set whether the measured value is transmitted
when changing the above-mentioned percentage
value.
Transmit reactive power at change
[Yes / No]
It is set whether the measured value is transmitted
when changing the above-mentioned percentage
value.
Transmit zero current st change
[Yes / No]
It is set whether the measured value is transmitted
when changing the above-mentioned percentage
value.
Enertex
®
Bayern GmbH – Ebermannstädter Straße 8 - 91301 Forchheim - Deutschland - [email protected]