EnerSys Alpha Micro 100, Installation And Operation Manual

Page: 78 / 88

77
017-220-J0 Rev C
• Copy the upgrade firmware file (only .sx or .fbin files NOT .ezip) to a folder on the laptop.
Procedure:
1. On the Alpha Micro 100, put the battery breaker in the OFF position.
2. Turn off the AC input to the Alpha Micro 100.
3. Short the jumper JP1 on the board.
4. Connect the USB cable between the Alpha Micro 100 and the laptop.
5. Put the battery breaker in the ON position.
6. Start the FXMProgrammer software.
7. Select a COM port from the drop-down list of available ports.
8. Click
Open File
to browse to the software file location (only .sx or .fbin files are supported).
9. Click the Apply the update to the FXM unit button.
10. Watch the progress bar and the Programming Messages window. (If there is a connection or any other kind
of error, click Apply the update again ).
The unit will reset automatically once the upgrade is finished.
11. Close the FXMProgrammer software.
12. Put the battery breaker in the OFF position.
13. Remove the jumper on JP1.
14. Put the battery breaker in the ON position.
15. Connect the AC input to the Alpha Micro 100.
Contact Alpha Technologies’ Technical Support at 1-800-667-8743 if you have any questions about this procedure.