Model 9312
Owner’s/Installation Manual
P/N 09312-94100C
Rev. 9/1/2009
© 2007 Brayden Automation Corporation
Brayden Automation Corporation
6230 Aviation Circle
Loveland, CO 80538
PHONE (970) 461-9600
FAX (970) 461-9605
www.brayden.com
WARNING:
Energy Sentry® Demand Management Systems are required to be installed by a duly licensed and qualifi ed electrician
or electrical contractor, who is appropriately licensed in the jurisdiction where the demand management system will be
installed.
Notice to Users
This equipment generates and uses radio frequency energy and if not installed and used properly, that is, in strict accor-
dance with the manufacturer’s instructions, it may cause interference to radio and television reception. It has been type
tested and found to comply with the limits for a Class B computing device in accordance with the specifi cations in
Subpart J of Part 15 of FCC Rules, which are designed to provide reasonable protection against such interference in a
residential installation. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1.
Reorient the receiving antenna.
2.
Relocate the computer with respect to the receiver.
3. Move
the computer away from the receiver.
4. Plug
the computer into a different outlet so that computer and receiver are on different branch circuits.
If necessary, the user should consult the dealer or an experienced radio/television technician for additional suggestions.
The user may fi nd the following booklet prepared by the Federal Communications Commission helpful: “How to Iden-
tify and Resolve Radio-TV Interference Problems.” This booklet is available from the U.S. Government Printing Offi ce,
Washington D.C. 20402, Stock No. 0004-0000-00345-4.
1
