Endress+Hauser Proline Promag W 400 HART, Operating Instructions Manual

Page: 97 / 198

Proline Promag W 400 HART Commissioning
Hauser 97
Measuring mode output 1 to n →  97
Assign pulse output 1 to n →  98
Measuring mode output 1 to n →  98
Parameter overview with brief description
Parameter Prerequisite Description User entry /
Selection
Factory setting
Display damping – Set display reaction time to
fluctuations in the measured
value. 0.0 to 999.9 s 0.0 s
Assign current output – Select process variable for
current output. • Volume flow
• Mass flow
• Corrected volume
flow
• Flow velocity
• Conductivity
*
• Corrected
conductivity
*
• Temperature
• Electronic
temperature
Volume flow
Damping output 1 – Set reaction time for output
signal to fluctuations in the
measured value. 0 to 999.9 s 1 s
Measuring mode output 1 – Select measuring mode for
output. • Forward flow
• Forward/Reverse
flow
• Reverse flow
compensation
Forward flow
Assign frequency output In the Operating mode
parameter (→  90), the
Frequency option is selected.
Select process variable for
frequency output. • Off
• Volume flow
• Mass flow
• Corrected volume
flow
• Flow velocity
• Conductivity
*
• Corrected
conductivity
*
• Temperature
• Electronic
temperature
Off
Damping output 1 to n – Set reaction time for output
signal to fluctuations in the
measured value. 0 to 999.9 s 1 s
Measuring mode output 1 to n – Select measuring mode for
output. • Forward flow
• Forward/Reverse
flow
• Reverse flow
• Reverse flow
compensation
Forward flow