Endress+Hauser Proline Promag W 400 HART, Operating Instructions Manual

Page: 119 / 198

Proline Promag W 400 HART Operation
Hauser 119
11.6 Performing a totalizer reset
The totalizers are reset in the Operation submenu:
• Control Totalizer
• Reset all totalizers
Navigation
"Operation" menu → Totalizer handling
‣
Totalizer handling
Control Totalizer 1 to n →  119
Preset value 1 to n →  119
Reset all totalizers
→  119
Parameter overview with brief description
Parameter Prerequisite Description Selection / User
entry
Factory setting
Control Totalizer 1 to n One of the following options is
selected in the
Assign process
variable parameter
(→  103) Totalizer 1 to n
submenu:
• Volume flow
• Mass flow
Control totalizer value. • Totalize
• Reset + hold
• hold
• Reset + totalize
• totalize
• Hold Totalize
Preset value 1 to n One of the following options is
selected in the
Assign process
variable parameter
(→  103) Totalizer 1 to n
submenu:
• Volume flow
• Mass flow
Specify start value for totalizer.
Dependency

The unit of the selected
process variable is
specified for the totalizer
in the
Unit totalizer
parameter (→  103).
Signed floating-point
number 0 l
Reset all totalizers – Reset all totalizers to 0 and
start. • Cancel
• Reset + totalize Cancel
11.6.1 Function scope of the "Control Totalizer" parameter
Options Description
Totalize The totalizer is started or continues running.
Reset + hold The totaling process is stopped and the totalizer is reset to 0.
hold The totaling process is stopped and the totalizer is set to its defined start value
from the
Preset value parameter.
Reset + totalize The totalizer is reset to 0 and the totaling process is restarted.
totalize The totalizer is set to the defined start value from the Preset value parameter and
the totaling process is restarted.