Specification
multi X 2500
124
14.2
Guidelines and standards
The analyzer has a protection class of I.
The housing has safety type IP 20.
The analyzer complies with the safety standards
EN 61010-1
EN 61010-2-081
EN 61010-2-010
EN 61010-2-51
The analyzer has been checked for interference emission and noise immunity.
It meets the requirements for interference emission of
EN 61326-1 (EN 55011 group 1, class B)
It meets the requirements for noise immunity of
EN 61326-1 (requirements for use in a basic EMC environment)
The analyzer has been tested for environmental compatibility and meets the
requirements of
ISO 9022-3
ISO 9022-2
The analyzer has been designed and tested in accordance with standards meeting the
requirements of EU directives 2014/35/EU and 2014/30/EU. The device leaves the
factory in a sound condition as far as technical safety is concerned. To maintain this
condition and to ensure safe operation, the operator must strictly observe the safety
and operating instructions contained in this operating manual. For accessories which
have also been supplied, and system components from other manufacturers, their
operating instructions should be referred to.
The device contains controlled substances (according to the guideline "Management
Methods for the Restriction of the Use of Hazardous Substances in Electrical and
Electronic Products"). Analytik Jena guarantees that the substances will not leak within
the next 25 years and, therefore, will not cause any environmental danger or health
risk within this period of time if the device is used as intended.
Safety class and safety
type
Device safety
EMC compatibility
Environmental
compatibility
EU directives
Guidelines for China
