DANGER
7. Operation
¡
Be sure to turn on the input power supply after closing the front case.
While being energized, be sure not to open the front case.
Otherwise, there is the danger of electric shock
¡
Be sure not to operate the switches with wet hands.
Otherwise, there is the danger of electric shock.
¡
While the inverter is energized, be sure not to touch the inverter terminals
even when the motor is stopped.
Otherwise, there is the danger of electric shock.
¡
If the Retry Mode is selected, the motor may suddenly restart during the trip
stop. Do not approach the machine(be sure to design the machine so that
safety for personnel is secure even if it restarts).
Otherwise, it may cause injury to personnel.
¡
If the power supply is cut off for a short period of time, the inverter may
restart operation after the power supply recovers if the command to operate
is active. If a restart may pose danger to personnel, so be sure to use a
lock-out circuit so that it will not restart after power recovery.
Otherwise, it may cause injury to personnel.
¡
The stop key is effective only when the stop function is enabled. Be sure to
enable the key sepatately from the emergency stop.
Otherwise, it may cause injury to personnel.
¡
Arter the operation command is given, if the alarm reset is conducted, it will
restart suddenly. Be sure to set the alarm reset after verifying the operation
command is off.
Otherwise, it may cause injury to personnel.
¡
Be sure not to touch the inside of the energized inverter or to put any
conductive object into it.
Otherwise, there is a danger of electric shock and/or fire.
7-1
ENDA E-100
INSTRUCTION MANUAL
