26534-1-0610
Page 23
LED CODES
Steady ON
Normal operation, power ON to control
2 Flashes
3 unsuccessful ignition trials
3 Flashes
0DLQEXUQHUÀDPHIDLOHGWLPHVGXULQJDVLQJOHKHDWLQJF\FOH
4 Flashes
Interrupt power for 5 seconds to reset control
Steady Flash
)ODPHGHWHFWHGRXWRIVHTXHQFH
Electric (120 volt) Operated Remote Control (FREC)
1. Disconnect 3-prong power cord from receptacle.
2. Remove wire from 120 VAC hot terminal on control module.
3. Connect female terminal from receiver onto 120 VAC hot
terminal on control module.
4. Connect remaining wire from remote control (male terminal) to
(female terminal) on power cord removed from control module
(step 2).
5. Insert electric remote control power cord plug into the junction
ER[RQWKHULJKWVLGHRI¿UHSODFH
6. Connect 3-prong plug into receptacle. See wiring diagram on
page 34.
)LJXUH
DIRECT IGNITION WIRING DIAGRAM
OPTIONAL REMOTE CONTROL (120V DIRECT IGNITION)
