26534-1-0610
Page 11
Note:
'LPHQVLRQ&LVWKHPLQLPXPZLWKWKH¿UHSODFHIDFHH[WHQGLQJLQIURQW
RIWKHIUDPLQJWRDOORZIRU¿QLVKLQJPDWHULDOV
Figure 11
Attention:
$GG WR ³$´ GLPHQVLRQV ZKHQ XVLQJ D ÀXVK
mantel base.
Attention:
If a base or mantel is not used and the appliance is
installed directly on carpeting, tile or other combustible material
RWKHUWKDQZRRGÀRRULQJLWVKDOOEHLQVWDOOHGRQDPHWDORUZRRG
panel extending the full width and depth of the appliance. The
vertical dimension in Figure 11 must be adjusted when a metal or
wood panel is placed beneath the appliance.
Finishing (Figure 12)
Finish the walls with the material of your choice. Only non-
FRPEXVWLEOH PDWHULDOV PD\ EH XVHG WR FRYHU WKH EODFN ¿UHSODFH
front.
:DUQLQJ :KHQ ¿QLVKLQJ WKH ¿UHSODFH QHYHU REVWUXFW
or modify the air inlet/outlet louvers in any manner.
Provide adequate clearances around air openings into the
combustion chamber.
Caution:
,IWKHMRLQWVEHWZHHQWKH¿QLVKHGZDOODQGWKH¿UHSODFH
surround (top and sides) are sealed, a 300°F minimum sealant
PDWHULDOPXVWEHXVHG7KHVHMRLQWVDUHQRWUHTXLUHGWREHVHDOHG
Only non-combustible material (using 300°F minimum adhesive if
QHHGHGFDQEHDSSOLHGDVIDFLQJWRWKH¿UHSODFHVXUURXQG
Combustible Surround Installation
Louvered Models
Figure 12a
Flush Face Models
Figure 12b
Attention: Cold climate installation recommendation:
When installing this unit against a non-insulated exterior
wall, it is recommended that the outer walls be insulated
to conform to applicable insulation codes.
INSTALLATION (CONT)
Minimum Framing Dimensions
BVD34
BVD36
BVP42
"A"
35 3/4"
(908mm)
37 3/4"
(959mm)
37 3/4"
(959mm)
"B"
37 3/8"
(949mm)
39 3/8"
(1,000mm)
43 3/8"
(1,102mm)
"C"
14 3/8"
(378mm)
17 7/8"
(454mm)
17 7/8"
(454mm)