26534-1-0610
Page 10
Framing dimension "A" includes a three inch clearance for
VWDQGRIIVRQ¿UHER[
Framing and Finishing
1. Choose unit location.
)UDPHLQ¿UHSODFHZLWKDKHDGHUDFURVVWKHWRS,WLVLPSRUWDQW
WRDOORZIRUWKH¿QLVKHGIDFHWKLFNQHVVZKHQVHWWLQJWKHGHSWK
of the frame.
See Figures 9 & 11.
$WWDFK¿UHSODFHWRIUDPLQJXVLQJDGMXVWDEOHQDLOLQJÀDQJHV
Preset depth to suit facing material (adjustable to 1/2", 5/8" or
3/4" depths).
4. Use (8) 1/2" hex-head screws supplied in hardware package to
VFUHZWKURXJKVORWWHGKROHVLQQDLOLQJÀDQJHVWKHQVFUHZLQWR
SUHGULOOHGKROHVRQ¿UHSODFHVLGH0HDVXUHIURPIDFHRI¿UHSODFH
WRIDFHRIWKHQDLOLQJÀDQJHVWRGHWHUPLQH¿QDOGHSWK
9HQW3LSH&OHDUDQFH
Note:
Maintain one inch (1") of clearance around vertical vent pipe.
)ROORZWKH%9HQWV\VWHPLQVWUXFWLRQVIRULQVWDOODWLRQUHTXLUHPHQWV
and clearances. Failure to follow the B-Vent manufacturer's
LQVWUXFWLRQVPD\FDXVHLPSURSHUGUDIWDQGSRVVLEOH¿UHKD]DUG
Figure 10
,QVWDOOWKH)UHVK$LU.LW%9$
A fresh air kit is available as an optional feature with this appliance.
The fresh air kit helps to decrease the amount of room air taken by
utilizing outside air for combustion. It is strongly recommended that
it be installed. Installation of the fresh air kit should be performed
DWWKHIUDPLQJVWDJHRIWKH¿UHSODFHLQVWDOODWLRQ
7KHIUHVKDLUNLWLQVWDOOVRQWKHOHIWVLGHRIWKH¿UHSODFH
To install the BVA1 fresh air kit, refer to the installation instructions
provided with the kit.
Note:
The outside air kit can terminate at any level with the
exception that it must terminate at least 1 ft below the vent
termination cap. The fresh air kit inlet hood should be positioned
at least 2 ft above the ground level, in a manner that will not
allow snow, leaves, etc. to block the inlet.
WARNING: Exhaust products of gasoline engines are
KD]DUGRXV7KHRXWVLGHDLUPXVWQRWEHWDNHQIURPDJDUDJH
VSDFHDWWLFVSDFHVEDVHPHQWVRUDERYHWKHURR¿QJZKHUH
RWKHUKHDWLQJDSSOLDQFHIDQVRUFKLPQH\VH[KDXVWRUXWLOL]H
the air.
Figure 9
Framing (Figure 11)
)LUHSODFHIUDPLQJFDQEHEXLOWEHIRUHRUDIWHUWKH¿UHSODFHLVVHWLQ
place. Framing should be positioned to accommodate wall covering
DQG ¿UHSODFH IDFLQJ PDWHULDO 7KH ¿UHSODFH IUDPLQJ VKRXOG EH
constructed of 2 x 4 lumber or heavier. The framing headers may
UHVWRQWKH¿UHSODFHVWDQGRIIV5HIHUWR)LJXUHIRUPLQLPXP
framing dimensions.
CAUTION: MEASURE FIREPLACE DIMENSIONS AND
9(5,)<)5$0,1*0(7+2'6$1':$//&29(5,1*
DETAILS BEFORE FRAMING CONSTRUCTION
BEGINS.
INSTALLATION
