![background image](http://html.mh-extra.com/html/empire-comfort-systems/bvd34fp30-f/bvd34fp30-f_installation-instructions-and-owners-manual_2404042014.webp)
26534-1-0610
Page 14
1
4
5
3
2
Before you begin: if you are installing logs into the BVD34 or
%9' PRGHO WKHQ WKLV ¿UHSODFH LV VXSSOLHG ZLWK D VHW RI ¿YH
FHUDPLF¿EHUORJV'RQRWKDQGOHWKHVHORJVZLWK\RXUEDUHKDQGV
$OZD\VZHDUJORYHVWRSUHYHQWVNLQLUULWDWLRQIURPFHUDPLF¿EHUV
After handling logs, wash your hands gently with soap and water
WRUHPRYHDQ\WUDFHVRI¿EHUV
The positioning of the logs is critical to the safe and clean operation
RIWKLV¿UHSODFH6RRWLQJDQGRWKHUSUREOHPVPD\UHVXOWLIWKHORJV
DUHQRWSURSHUO\DQG¿UPO\SRVLWLRQHGLQWKH¿UHSODFH3OHDVHUHIHU
to
Figure 16
and
Figure 17
and corresponding WARNING when
completing following log placement instructions.
3ODFHIURQWORJVDQGEHWZHHQIURQWJUDWHÀDQJHDQG
main burner. Align notches on front logs with locator tabs in
base.
2. Place middle log (#3) between front and rear loop of burner.
Note: Do not place log on top of pilot assembly.
3ODFHUHDUORJRQUHDUORJVKHOI%RWWRPÀDQJHRIORJPXVW
be placed between the log shelf and burner tube.
3ODFHEUDQFKRQWRORJDQGÀDWDUHDRQORJ7KH
bottom of the branch is to be placed behind the grate tang that
is second from the left.
5. Place decorative rock in front of grates and sides of main burner
pan.
ATTENTION
: Do not place decorative rock on logs or burner.
7KH GHFRUDWLYH URFN VKRXOG RQO\ EH SODFHG RQ WKH ¿UHSODFH
ÀRRU
EMBER MATERIAL PLACEMENT ON BURNER
6. After all logs are positioned properly, apply Rockwool ember
material to the front burner port area. To apply, carefully
separate the ember material into small amounts no larger than
"dime size" pieces. Fluffed up pieces one layer thick on top
of the burner generally works best, and will provide the best
ember glow. Do not place ember material more than one layer
thick. No more than (1) small packet of ember material (part
no. 15999) evenly placed on the burner, is recommended on
BVD34 and BVD36 models. Using additional ember material
will decrease the amount of ember glow effect. Extra ember
material should be saved for future ember applications as
necessary. See Figure 17.
Figure 16
WARNING: Failure to position the parts in accordance
ZLWK WKLV GLDJUDP RU IDLOXUH WR XVH RQO\ SDUWV VSHFL¿FDOO\
approved with this appliance may result in property
damage or personal injury.
Attention:
Do not use Figure 16 or Figure 17 to order logs. Refer
to parts list on page 28 and parts view on page 29 to order logs
DQGRUHPEHUPDWHULDOIRU\RXUDSSURSULDWH¿UHSODFHPRGHO
Figure 17
LOG PLACEMENT (5 LOG SET)
Optional Platinum Bright Ember Kits are available from your
Fireplace Dealer. These embers may be used with all BVD/BVP
6HULHV¿UHSODFHV2UGHUDQGXVHDVLQGLFDWHGDVEHORZ
Platinum Bright Embers
PE-20-1
Note: A signle layer of embers is to be used when applying Platinum
Bright Embers (alone or in combination with production embers)
to the burner.