Emerson Smart Wireless Gateway 1420, Reference Manual

Page: 75 / 96

B Product Certifications
Rev 2.0
B.1 European directive information
A copy of the EU Declaration of Conformity can be found at the end of the Quick Start
Guide. The most recent revision of the EU Declaration of Conformity can be found at
Emerson.com/Rosemount .
B.2 Telecommunication Compliance
All wireless devices require certification to ensure that they adhere to regulations
regarding the use of the RF spectrum. Nearly every country requires this type of product
certification. Emerson
™
is working with governmental agencies around the world to supply
fully compliant products and remove the risk of violating country directives or laws
governing wireless device usage.
B.3 FCC and IC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
conditions: This device may not cause harmful interference. This device must accept any
interference received, including interference that may cause undesired operation. This
device must be installed to ensure a minimum antenna separation distance of 20 cm from
all persons.
B.4 Ordinary location certification
As standard, the transmitter has been examined and tested to determine that the design
meets the basic electrical, mechanical, and fire protection requirements by a nationally
recognized test laboratory (NRTL) as accredited by the Federal Occupational Safety and
Health Administration (OSHA).
B.5 Installing Equipment in North America
The US National Electrical Code
®
(NEC) and the Canadian Electrical Code (CEC) permit the
use of Division marked equipment in Zones and Zone marked equipment in Divisions. The
markings must be suitable for the area classification, gas, and temperature class. This
information is clearly defined in the respective codes.
B.6 USA
N5 U.S.A. Division 2
Certificate: CSA 70010780
Reference Manual Product Certifications
00809-0200-4420 September 2020
Emerson.com/Rosemount 75