manualshive.com logo in svg

Emerson Smart Wireless Gateway 1420, Reference Manual

Share
Download
Emerson Smart Wireless Gateway 1420 Reference Manual Download Page 81

Figure C-2: Decommissioned Nodes Folder within DeltaV Explorer

New Wireless 
Gateway

C.5.2

Commission the gateway

Commission the Gateway using the following procedure:

Procedure

1. Navigate to START>PROGRAMS>DELTAV>ENGINEERING> DELTAV EXPLORE to

launch the DeltaV Explorer application.

2. Expand the folder SYSTEM CONFIGURATION >PHYSICAL

NETWORK>DECOMMISSIONED NODES.

3. Right click on the Smart Wireless Gateway and select Commission.
4. Enter a name for the Gateway and select OK.
5. Select YES when prompted to Auto-Sense Wireless Gateway.

At this time the Reconcile I/O window will appear. The purpose of this screen is to
assign WirelessHART devices to DeltaV I/O channel. This allows the wireless device
to be referenced in other DeltaV applications like Control Studio.

Reference Manual

DeltaV

™

 Ready

00809-0200-4420

September 2020

Emerson.com/Rosemount

81

Summary of Contents for Smart Wireless Gateway 1420

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands