Emerson Rosemount CT4215, Reference Manual

Page: 35 / 94

Once the leak detector has been moved into
position the transportation wheels must be
removed.
Note
There is limited clearance between the M8 bolt
head and the floor as shown opposite.
Remove the 8 off M8 bolts and washers securing
the transportation wheels to the leak detector
base.
It will be necessary to support the leak detector
enclosure while the transportation wheels are
slid out from under the unit.
Remove the two press fit covers to access the
bolting position.
Fit the securing bolts loosely to locate the leak
detector in place.
DO NOT TIGHTEN at this time.
Remove the 4 off press fit covers to access the
adjustable feet.
Using a 14mm AF socket adjust the feet to suit
giving a horizontal stable platform for the leak
detector.
Replace the covers.
Reference Manual Installation
00809-0100-4245 July 2022
Reference Manual 35