Emerson Fisher FIELDVUE DVC6000f, Instruction Manual

Page: 76 / 384

DVC6000f Digital Valve Controllers
December 2009 4-16
Table 4-3. Resource Block Parameter Definitions (Continued)
Label
PARAMETER_NAME
Description
Initial
Value
Range Mode
RO /
RW
Index
Number
Update Event
UPDATE_EVT
35
UNACKNOWLEDGED 35.1 RW ALL
0=Undefined
1=Acknowledged
2=Unacknowledged
0=Undefined
Data Type: DS-73
This alert is generated by any change to the
static data. To support tracking changes in
static parameter values, the blocks static
revision parameter will be incremented each
time a static parameter value is changed. Also,
the blocks static revision parameter may be
incremented if a static parameter is written but
the value is not changed. If the Actual Mode is
not Out of Service and Reports is selected in
the Feature Select parameter, then this
parameter will be sent to the host system
providing the host has set up alert
communications. Changes to static data while
the block is Out of Service will be reported
when the block transitions to another mode.
UPDATE_STATE 35.2 RO NA
0=Undefined
1=Update reported
2=Update not
reported
0=Undefined
TIME_STAMP 35.3 RO NA 0
STATIC_REVISION 35.4 RO NA 0
RELATIVE_INDEX 35.5 RO NA 0
Block Alarm
BLOCK_ALM
36
UNACKNOWLEDGED 36.1 RW ALL
0=Undefined
1=Acknowledged
2=Unacknowledged
0=Undefined
Data Type: DS-72
This alarm is generated by a nonzero value in
the Block Error. parameter. This alarm has a
fixed priority of 2. For a BLOCK_ALM to be
broadcast to the host the following conditions
must be met:
The feature Reports must be selected
Alert communication with the host must be
setup
In the ALARM_SUM parameter, the disable
bit for Block Alarm must be clear.
ALARM_STATE 36.2 RO NA
0=Undefined
1=Clear reported
2=Clear not reported
3=Active reported
4=Active not reported
0=Undefined
TIME_STAMP 36.3 RO NA 0
SUBCODE 36.4 RO NA 0
VALUE 36.5 RO NA 0
Alarm Summary
ALARM_SUM
37
CURRENT 37.1 RO NA
0: Discrete alarm
7: Block Alarm
All bits: 0
Data Type: DS-74
0=clear, acknowledged, reported, enabled
Current alert status, unacknowledged states,
unreported states, and disabled states of the
alarms associated with the function block. The
Resource block only has two alarms: Write
Alarm and Block Alarm.
UNACKNOWLEDGED 37.2 RO NA
0: Discrete alarm
7: Block Alarm
All bits: 0
UNREPORTED 37.3 RO NA
0: Discrete alarm
7: Block Alarm
All bits: 0
DISABLED 37.4 RW ALL
0: Discrete alarm
7: Block Alarm
All bits: 0
Acknowledge Option
ACK_OPTION
38 RW ALL
0: Discrete Alarm
(Write Lock off)
7: Block Alarm
0: 0
7: 0
Data Type: Bit String
0=Disable
1=Enable
Selection of whether alarms associated with
the block will be automatically acknowledged.
Write Priority
WRITE_PRI
39 RW ALL 0 to 15 0
Data Type: Unsigned8
Priority of the alarm generated by setting
WRITE_LOCK to Unlocked.
Write Alarm
WRITE_ALM
40
Data Type: DS-72
This alarm is generated when Unlocked in the
WRITE_LOCK parameter is set. This alarm
has a priority of WRITE_PRI. For a
WRITE_ALM to be broadcast to the host the
following conditions must be met:
The feature Reports must be selected
Alert communication with the host must be
setup
In the ALARM_SUM parameter, the disable
bit for Write Alarm must be clear.
WRITE_PRI must be greater than 1.
UNACKNOWLEDGED 40.1 RW ALL
0=Undefined
1=Acknowledged
2=Unacknowledged
0=Undefined
ALARM_STATE 40.2 RO NA
0=Undefined
1=Clear reported
2=Clear not reported
3=Active reported
4=Active not reported
0=Undefined
TIME_STAMP 40.3 RO NA 0
SUBCODE 40.4 RO NA 0
VALUE 40.5 RO NA 0
−
Continued
−
4