Emerson Daniel 3410 Series, Installation Manual

Page: 50 / 140

meter. NEVER use the hoist rings on the meter to lift other components such as
meter tubes, piping or fittings attached to the meter. Doing so will exceed the load
rating of the hoist rings.
13. Remove the hoist rings from the meter after lifting is completed and store them in
an appropriate case or container per their manufacturer's recommendation.
14. Apply heavy lubricant or anti-seize to the threads of the plug bolts and reinstall the
plug bolts to keep the tapped holes free of debris and to prevent corrosion.
Obtain safety engineered swivel hoist rings
A list of approved manufacturers of safety engineered hoist rings is below:
• American Drill Bushing Company (www.americandrillbushing.com)
• Carr Lane Manufacturing Company (www.carrlane.com)
Select an approved supplier from the list below. These vendors can supply the safety
engineered hoist rings. This is not intended to be a complete list.
• Fastenal (www.fastenal.com)
• Reid Tools (www.reidtool.com)
The appropriate hoist rings can also be purchased directly from Daniel. The following table
provides part numbers for reference:
Hoist ring part number lookup table Table 2-1:
Daniel part num-
ber
(1)
Hoist ring thread size & load
rating American Drill
Bushing Co. P/N Carr Lane Manu-
facturing Co. P/N
1-504-90-091 3/8"-16UNC, 1000 lb. 23053 CL-1000-SHR-1
1-504-90-092 1/2"-13UNC, 2500 lb 23301 CL-23301-SHR-1
1-504-90-093 3/4"-10UNC, 5000 lb. 23007 CL-5000-SHR-1
1-504-90-094 1"-8UNC, 10000 lb. 23105 CL-10000-SHR-1
1-504-90-095 1-1/2"-6UNC, 24000 lb. 23202 CL-24000-SHR-1
(1) The part numbers include only one hoist ring. Two hoist rings are required per meter.
Size safety engineered swivel hoist ring needed
To determine the size of the hoist rings required for your meter, use the appropriate table
below. Look down the column that matches the ANSI rating of your meter. Find the row
that contains your meter size. Follow the row to the end to find the appropriate hoist ring
part number.
Hoist Ring lookup table for Daniel 3415, 3416 and 3417 gas meters Table 2-2:
ANSI 300 ANSI 600 Daniel Part Number Thread
8" to 10" 8" 1-504-90-091 3/8"
12" to 16" 10" to 16" 1-504-90-092 1/2"
Mechanical installation
40 Gas Ultrasonic Flow Meter