Installation, Operation and Maintenance Manual
MAN-02-04-97-0713-EN Rev. 1
October 2019
41
Section 6: Local Controls
Local Controls
Table 9.
List
output torque
mot temp
motor speed
term temp
main voltage
log status
current
wireless report
temperature
node report *
time
FDI report *
date
base report
alarm
term report
warning
Ain/Aout report *
Ktemp
The data with * are only present if the relevant modules are present.
2.
3-position selector
to set the following operation modes:
•
LOCAL: for local control only
•
OFF: no control is active but the actuator is still connected to the mains
•
REMOTE: for remote control only
3.
The XTE3000 can be provided with a radio-frequency wireless connection based on
a qualified Bluetooth class 1 module. This allows exchange of data with a PDA or PC with
built-in
Bluetooth™
technology. The following tasks can be wirelessly performed:
•
View and change configuration
•
Set maintenance function
•
Read maintenance data
•
Download new firmware to the XTE3000
•
The blue LED indicates that communication with a host device is established
4.
Numeric display
to indicate the present valve position as a % of open position.
Display resolution is a function of the number of complete turns of the actuator
output shaft:
•
From 2 to 4 turns = 0.2%
•
From 4 to 8,000 turns = 0.1%
5.
Three LEDs
to indicate the actuator status according to the following logic:
•
green ON/ red OFF: the actuator is stopped in the open position
•
green OFF/ red ON: the actuator is stopped in the closed position
•
green OFF/ red flashing: the actuator is running in the closing direction
•
green flashing/ red OFF: the actuator is running in the opening direction
•
green ON/ red ON: the actuator is stopped in an intermediate position
•
yellow ON: alarm
•
yellow flashing: warning
The above color combination is supplied as standard, but it may be changed
(red to green, green to red, and yellow to red), during actuator setup operations.
