Figure 10-19
- IO Config Screen
• 37
IO Config Screen:
Press the T5 button (down arrow) to highlight the
parameter you wish to change. Press T4 SET to edit the
value. Once the parameter is flashing, press the T3 button
or T5 button to change the value and press T4 SET again
to submit change. To see additional parameters in the IO
Config screen, press the T8 button (right arrow). Once in
the additional Valve Config screen, you can press the T3
button (left arrow) to go back a screen or press the T1 but-
ton EXIT to exit back to the main Configuration screen.
IO Configuration Additional Screen:
Figure 10-20
- IO Config Additional Screen
Figure 10-21
- IO Config Additional Screen
Figure 10-22
- IO Config Additional Screen
Figure 10-23
- IO Config Additional Screen
Summary of Contents for 818-9010
