14 • High Pressure CO2 Controller Installation and Operation Manual
3.1.2. Network Addressing - Visograph
The network address makes a board unique from other boards on the network of the same type. This allows
the site controller to find it and communicate with it easily.
The network address of the High Pressure CO2 controller is set using add-on devices called visographs
(
P/N 818-9002
).
3.1.2.1.
Connecting the Visograph
The visograph is connected with a 3-wire connection on pins 60, 61, and 62.
Figure 3-2
- Network ID Settings
CAUTION: The
High Pressure CO2 controller
may be damaged if the wires are crossed when
connecting the visograph, especially if pin 60
(Vnr) is accidentally connected to + or –
Summary of Contents for 818-9010
