• 15
3.1.2.2.
Visograph Navigation
• Four status menu items are available to choose from
within the status menu.
• Press corresponding button along the bottom
(T1-T8) to navigate to desired item.
Figure 3-3
- Visograph Menu
3.1.2.3.
Setting the MODBUS Address
To setup the MODBUS settings, you will have to
enter the configuration menu from the main menu.
The configuration menu is password protected.
Figure 3-4
- Main Menu
From main menu, press the
T1
+
T3
+
T8
buttons
together and hold until you see the Configuration
screen.
Figure 3-5
- Configuration Screen
Highlight
General Config
and press the ENTER
key (
T3
).
Figure 3-6
- General Config Screen
Press
T8
to arrow over to the next screen.
Figure 3-7
- General Config Screen
Using the UP and DOWN arrows (
T3
and
T5
), highlight the field and press
T4
to change the
address to the desired value.
Summary of Contents for 818-9010
