• 33
10 Visograph
A Visograph is used as the local display. The screens
provide access for setting up and assigning all inputs, and
outputs. In addition to the entire parameters’ configura-
tion, the user can change the time and date, MODBUS
address, baud rate (9600 or 19200), and update the Viso-
graph with new screens if needed.
Note: Once the High Pressure CO2 controller is online
with E2, you will only be able to make changes through E2
only. For some preference settings, please make changes
on the Visograph before bringing the device online with
E2.
10.1 Status Screen
In the status screen, users will have visibility into the
operation of both HPV and BGV with their corresponding
control values and parameters. This includes the HPV dual
and failure/alarm operation modes. The status screen also
provides values to show valve modulation. In addition, the
application version is available on the first status screen.
10.1.1 Main Menu and Status
Screens
Bootup Screen:
Figure 10-1
- Bootup Screen
Main Menu Screen:
Figure 10-2
- Main Menu Screen
Highlight
Status
to enter the Status screen.
Figure 10-3
- Status Screen
From the Status screen, you can select to view the
General Status, HPV Status, BGV Status and Alarms
screens. This screen also has the application version soft-
ware. Highlight the status screen to view and press the T4
button for ENTER.
General Status Screen:
Figure 10-4
- General Status Screen
This screen gives you a general overview of the inputs
and online status. To go back to the Status screen, press the
Summary of Contents for 818-9010
