37
GB
•
If you want to reselect spinning, just
press the button until you reach the
desired speed.
•
You can change the speed without
pausing the washing machine.
BUTTON LOCK
•
If you press both the
TEMPERATURE
and
SPIN SPEED
buttons simultaneously for around
3
seconds
this will lock the buttons.
This lets you lock the settings so
they cannot be changed accidentally
by pressing a button on the display
during a programme.
•
You can release the button lock
by pressing the same two buttons
again or turning off the machine.
Digital display
The information on the display keeps
you updated about the status of the
washing machine.
1) OPTION INDICATORS
These symbols show which options can
be selected with the associated buttons.
2) CYCLE TIME
•
When you select a programme,
the cycle time is automatically
displayed, and may vary depending
on the options you choose.
•
When the programme has started,
you can see how much time is left
until the programme ends.
•
The appliance calculates how long
the programme will take based on
a standard load, and this time is
updated during the cycle, based on
the actual load and composition.
3) DOOR LOCK INDICATOR
•
This symbol shows that the lid is
closed.
•
If you press
START/PAUSE
with
the lid closed, the light will flash and
then glow steadily.
•
A safety device prevents the lid
from being opened as soon as a
programme ends. After the wash
cycle has ended, wait
2 minutes
for
the door lock light to go out before
opening the lid. When the cycle
is complete, turn the programme
selector to
OFF
.
Controls and programmes
Using too much detergent can lead to
foaming. If the machine detects large
amounts of foam it may skip the spin
cycle or extend the programme and
increase water consumption.
The washing machine is fitted with an
electronic device that prevents spinning
if the load is unbalanced. This reduces
sound and vibration and prolongs the life
of the machine.
1
5
2
3 4
6
7
Close the lid BEFORE you press the
START/PAUSE button.
If the lid is not fully closed the light
will continue to flash for around 7
seconds and the programme start will be
automatically cancelled. If this happens
you should close the lid properly and
press the START/PAUSE button again.
