ELTEX MES23xx, Operation Manual

Page: 57 / 208

MES53xx, MES33xx, MES23xx Ethernet Switch Series 57
console# configure
console(config)# interface { gigabitethernet gi_port | tengigabitethernet
te_port | fortygigabitethernet fo_port | oob |port-channel group |range {…} |
loopback loopback_id }}
console(config-if)#
This mode is available from the configuration mode and designed for configuration of interface
parameters (switch port or port group operating in the load distribution mode) or the interface range
parameters.
The interface is selected by the following commands:
For MES5324
Table 5.27– List of interface selection commands for MES5324
Command Destination
interface fortygigabitethernet fo_port For configuring 40G interfaces
interface tengigabitethernet te _ port For configuring 10G interfaces
interface gigabitethernet gi _ port For confoguring 1G interfaces
interfaceport-channel group For configuring channel groups
interface oob For configuring control interfaces
interface loopback loopback_id For configuring virtual interfaces
where
–
group – sequential number of a group, total number in accordance with Table 2.9. Main
specifications (‘Link agregation (LAG)’ string);
–
fo_port
– sequential number of 40G interfaces specified as follows: 1..8/0/1..4;
–
te_port – sequential number of 10G interfaces specified as follows: 1..8/0/1..24;
–
gi_port – sequential number of 1G interfaces specified as follows: 1..8/0/1;
–
loopback_id – sequential number of virtual interface corresponding Table Table 2.9. Main
specifications (‘Number of virtual Loopback interface’ string).
For MES3324F, MES2324, MES2324B, MES2324FB
Table 5.29 – List of interface selection commands for MES3324F, MES2324, MES2324B, MES2324FB
Command Destination
interface tengigabitethernet te _ port For configuring 10G interfaces
interface gigabitethernet gi _ port For configuring 1G interfaces
interfaceport-channel group For configuring channel groups
interface oob
For configuring control interfaces (control interface is
not available for all MES2324x)
interface loopback loopback_id For configuring virtual interface
where
–
group – sequential number of a group, total number in accordance with Table Table 2.9. Main
specifications (‘Link agregation (LAG)’ string);