MES53xx, MES33xx, MES23xx Ethernet Switch Series
45
traceroute ip {
A.B.C.D
|
host
}
[size
size
] [ttl
ttl
] [count
count
] [timeout
timeout
]
[source
ip_address
]
host: (1..158) characters;
size: (64..1518)/64 bytes;
ttl: (1..255)/30;
count: (1..10)/3;
timeout: (1..60)/3 s.
Detect
traffic
route
to
the
destination
node.
-
A.B.C.D
- network node IPv4 address;
-
host
- domain name of the network node;
-
size
- size of the packet to be sent, the quantity of bytes in the
packet;
-
ttl
- maximum quantity of route sections;
-
count
- maximum quantity of packet transmission attempts for
each section;
-
timeout
- timeout of the request;
-
ip_address
- switch interface IP address used for packet
transmission;
The description of the command errors and results is
given in tables 5.12., 5.13.
traceroute ipv6 {
A.B.C.D.E.F
|
host
} [size
size
] [ttl
ttl
] [count
count
] [timeout
timeout
]
[source
ip_address
]
host: (1..158) characters;
size: (66..1518)/66 bytes;
ttl: (1..255)/30;
count: (1..10)/3;
timeout: (1..60) /3 s.
Detect traffic route to the destination node.
-
A.B.C.D.E.F
- IPv6 address of the network node;
-
host
- domain name of the network node;
-
size
- size of the packet to be sent, the quantity of bytes in the
packet;
-
ttl
- maximum quantity of route sections;
-
count
- maximum quantity of packet transmission attempts for
each section;
-
timeout
- timeout of the request;
-
ip_address
- switch interface IP address used for packet
transmission;
The description of the command errors and results is
given in tables 5.12., 5.13.
telnet {
A.B.C.D
|
host
} [
port
]
[
keyword1
…+
host: (1..158) characters;
port: (1..65535)/23.
Open TELNET session for the network node.
-
A.B.C.D
- network node IPv4 address;
-
host
- domain name of the network node;
-
port
- TCP port which is used by Telnet;
-
keyword
- keyword.
Specific Telnet commands and keywords are given in
tables 5.14.
ssh {
A.B.C.D
|
host
} [
port
]
[
keyword1...
]
host: (1..158) characters;
port: (1..65535)/22.
Open SSH session for the network node.
-
A.B.C.D
- network node IPv4 address;
-
host
- domain name of the network node;
-
port
- TCP port which is used by SSH;
-
keyword
- keyword.
Keywords are described in table 5.15.
resume [
connection
]
(1..4)/the last established
session
Switch to another established TELNET session.
-
connection
- number of established telnet session.
show users [accounts]
-
Show information on users that consume device resources.
show sessions
-
Display information about open sessions to remote devices.
show system
-
Output system information.
show system battery [unit
unit
]
unit: (1..8)/-
Display information about battery.
-
unit
– device number in a stack
show system id [unit
unit
]
unit: (1..8)/-
Device serial number.
-
unit
- the stack unit number.
show system [unit
unit
]
unit: (1..8)/-
Show switch system information.
-
unit
- the stack unit number.
show system fans [unit
unit
]
unit: (1..8)/-
Display information about fan status.
-
unit
- the stack unit number.
show system power-supply
-
Display information about power module state.
show system sensors
-
Display information about temperature sensors.
show version
-
Display the current firmware version.
show system router
resources
-
Display the total and used size of hardware tables (routing,
neighbours, interfaces).
show system tcam utilization
[unit
unit
]
unit: (1..8)/-
Show TCAM memory (Ternary Content Addressable Memory)
resource load.
-
unit
- the stack unit number.
