MES53xx, MES33xx, MES23xx Ethernet Switch Series
44
console>
Table 5.8. EXEC mode commands
Command
Value/Default value
Action
macro apply
word
word: (1..32) characters
Apply the selected macro.
macro trace
word
Validate the selected macro.
show parser macro [{brief |
description [interface
{gigabitethernet
gi_port
|
tengigabitethernet
te_port
|
fortygigabitethernet
fo_port
|
port-channel
group
}] | name
word
}]
gi_port: (1..8/0/1..48);
te_port: (1..8/0/1..24);
fo_port: (1..8/0/1..4);
group: (1..16);
word: (1..32) characters
Show parameters of the macros configured on the device.
Interface configuration mode commands
Command line prompt in the interface configuration mode is as follows:
console(config-if)#
Table 5.9. Interface configuration mode commands
Command
Value/Default value
Action
macro apply
word
word: (1..32) characters.
Apply the selected macro.
macro trace
word
word: (1..32) characters.
Validate the selected macro.
macro description
word
word: (1..160) characters.
Specify the macro descriptor string.
no macro description
Delete the descriptor string.
5.4
System management commands
EXEC mode commands
Command line prompt in the EXEC mode is as follows:
console>
Table 5.10. System management commands in EXEC mode
Command
Value/Default value
Action
ping [ip] {
A.B.C.D
|
host
} [size
size
] [count
count
] [timeout
timeout
] [source
A.B.C.D
]
host: (1..158) characters;
size: (64..1518)/64 bytes;
count: (0..65535)/4;
timeout: (50..65535)/2000
ms.
This command is used to transmit ICMP requests (ICMP Echo-
Request) to a specific network node and to manage replies
(ICMP Echo-Reply).
-
A.B.C.D
- network node IPv4 address;
-
host
- domain name of the network node;
-
size
- size of the packet to be sent, the quantity of bytes in the
packet;
-
count
- quantity of packets to be sent;
-
timeout
- request timeout.
ping ipv6 {
A.B.C.D.E.F
|
host
}
[size
size
] [count
count
]
[timeout
timeout
] [source
A.B.C.D.E.F
]
host: (1..158) characters;
size: (68..1518)/68 bytes;
count: (0..65535)/4;
timeout: (50..65535)/2000
ms.
This command is used to transmit ICMP requests (ICMP Echo-
Request) to a specific network node and to manage replies
(ICMP Echo-Reply).
-
A.B.C.D.E.F
- IPv6 address of the network node;
-
host
- domain name of the network node;
-
size
- size of the packet to be sent, the quantity of bytes in the
packet;
-
count
- quantity of packets to be sent;
-
timeout
- request timeout.
