MES53xx, MES33xx, MES23xx Ethernet Switch Series
81
no ipv6 address
[
ipv6_address/prefix-length
link-local]
Remove the local IPv6 address.
ipv6 nd dad attempts
attempts_number
(0..600)/1
Specify the number of demand messages sent via the
interface to the device when IPv6 address duplication
(collision) is detected.
no ipv6 nd dad attempts
Return the default value.
ipv6 unreachables
-/enabled
Disable ICMPv6 Destination Unreachable messages for
packet transmission to a specific interface.
no ipv6 unreachables
Set the default value.
ipv6 mld version
version
version: (1..2)/2
Specify MLD version for the interface.
no ipv6 mld version
Set the default value.
Privileged EXEC mode commands
Command line prompt in the Privileged EXEC mode is as follows:
console#
Table 5.57. Privileged EXEC mode commands
Command
Value/Default value
Action
show ipv6 neighbors
{
ipv6_address
|
gigabitethernet
gi_port
|
tengigabitethernet
te_port
|
fortygigabitethernet
fo_port
|
port-channel
group
|
vlan
vlan_id
}
gi_port: (1..8/0/1..48);
te_port: (1..8/0/1..24);
fo_port: (1..8/0/1..4);
group: (1..16);
vlan_id: (1..4094)
Show information from the cache on the neighbour IPv6
devices.
clear ipv6 neighbors
-
Clear the cache that contains the information on neighbour
IPv6 devices. Information on static entries will remain.
EXEC mode commands
Command line prompt in the EXEC mode is as follows:
console#
Table 5.58. EXEC mode commands
Command
Value/Default value
Action
show ipv6 interface [brief |
gigabitethernet
gi_port
|
tengigabitethernet
te_port
|
fortygigabitethernet
fo_port
|
port-channel
group
|
loopback | vlan
vlan_id
]
gi_port: (1..8/0/1..48);
te_port: (1..8/0/1..24);
fo_port: (1..8/0/1..4);
group: (1..16);
vlan_id: (1..4094)
Show IPv6 protocol settings for a specific interface.
show ipv6 route [summary |
local | connected | static |
ospf | icmp | nd |
ipv6_address
/
ipv6_prefix
|
interface
{gigabitethernet
gi_port
|
tengigabitethernet
te_port
|
fortygigabitethernet
fo_port
|
port-channe l
group
|
loopback | vlan
vlan id
}]
gi_port: (1..8/0/1..48);
te_port: (1..8/0/1..24);
fo_port: (1..8/0/1..4);
group: (1..16);
vlan_id: (1..4094)
Show IPv6 route table.
