G E N E R A L
I N F O R M A T I O N
_________________________________________________________________________________
GsmAlarm-500
Software ver. 1.15
-
3-
1.3.
INTRODUTION
GsmAlarm-500 can be used for protection of houses, apartments, cottages and other buildings. In the case of
trespass of the protected zone GsmAlarm-500, depending on the programmed system operating algorithm, can
switch the siren on, call and send SMS messages to five users and transfer data to the alarm monitoring station
through GSM network. Data can be transferred directly to alarm monitoring station by Contact ID protocol
(audio channel), or can be converted to a standardized, many security service stations understandable, SIA DC-
09 IP format and transmitted via Internet (GPRS channel). It is possible to transfer data in both methods: first
try to send data via GPRS channel, if fails, use Contact ID protocol (audio channel).
User answers the call, can listen, what is going on in the unit and control the system using his mobile phone
keypad (through DTMF tones).
GsmAlarm-500 has 3 (4, if siren is not used) programmable outputs, intended for remote control of different
devices. User can turn on/off heating, ventilation or lighting systems etc, by using his mobile phone just by
typing a 2-digit code or sending SMS to the control device.
Device works perfect for remote control of automated gates, fences and electromagnetic door locks. In order to
open the gate, user calls GsmAlarm-500 number. Then GsmAlarm-500 checks the caller’s number in the list of
programmed user numbers and in the case of positive find, switches on the gate control device and cancels the
call automatically. 250 users are able to control the gate.
Up to 4 Paradox K636, K10V/H (MG10LEDV/H), K32 (MG32LED), K32LCD (MG32LCD), TM50 keypads
can be connected to GsmAlarm-500. By using the keypad users can arm or disarm the system and configure
system parameters. Following keypad LED indicators you can determine protected unit state, system mode
etc.
The system is controlled by iButton (also known as DALLAS) keys. Several control functions can be assigned
to each key. Example: a user can activate a protection mode and a controllable output by touching the contact
with the key. A user name can be assigned to each key (as well as to a keypad code) that will be indicated in
SMS messages. Up to 20 iButton keys can be programmed.
If keypad or iButton keys are not used, the system may be armed and disarmed by a simple switch or a short
free call. The alarm system is controlled exclusively from the user telephone. If the system receives a call,
coming not from the user's phone, the call is immediately interrupted and the user is sent an SMS message,
specifying the caller's phone number. The user is also informed by an SMS message about loss and restoration
of AC mains power supply.
The system answers only to the numbers programmed. If the system receives a call, coming not from the user's
phone, the call is immediately interrupted and the user is sent SMS, specifying the caller's phone number. SMS
messages are also sent to users in case of power loss and restoration.
The system has temperature measurement possibility. Up to 6 temperature sensors can be connected to
GsmAlarm-500 device. If temperature exceeds or subsides programmed range, system sends SMS to user(s),
relevant programmable output can be activated/ deactivated.
24 hour timer enables activation/deactivation of programmable output, arming or disarming, receiving SMS
messages with protected object state information on a desired time.
The system has capability to detect intentional jamming of GSM. The siren is activated upon detection of the
jamming signal, and the user is informed thereof by an SMS message about it after clearing of GSM jamming
signal. The message indicates the jamming onset time.
GsmAlarm-500 parameters may be set via a computer using the GSM alarm configuration tool GAprog. The
module is accessible via an USB port or over the internet through GPRS channel. If a computer is unavailable,
the system is set up by a keypad or SMS messages.
