37
Parameter setting
Actuator KNX S1R-B4 compact
• Version: 12.09.2022 • from application 1.0 • Technical changes and errors excepted.
Input as changeover switch:
If a button with switch function is assigned to the input, select the bus function
"Changeover Switch" and specify if the button should switch when pressed/released.
The input can be blocked using a blocking object. For active blocking there is
no bus
communication
.
Input to shutter, blinds, awning or window control:
If the input to the drive control is used via the bus, select the bus function "shutter",
"awning", "blinds" or "window" and specify the button function and control mode.
*A detailed description of the setting options for the individual control modi can be
found in the general part of chapter
Control modi for drive control
The input can be blocked using a blocking object. For active blocking there is
no bus
communication
.
Once when activating the blocking
• send 0
• send 1
• do not send telegram
Once when deactivating the blocking
• send 0
• send 1
• do not send telegram
• send current state
Function
Changeover Switch
Command when pressing the button
• Switching
• do not send telegram
Command when releasing the button
• Switching
• do not send telegram
Use blocking object
No • Yes
Function
Shutter / blinds / awning / window
Button function
Up • Down
Up • Down • Up/
Down
Retract • Extend •
Retract/Extend
Close • Open •
Close/Open
(blind)
(shutter)
(awning)
(window)
Control mode*
• Standard
• Standard inverted
• Comfort mode
• Dead man's switch
Use blocking object
No • Yes
