29
Parameter setting
Actuator KNX S1R-B4 compact
• Version: 12.09.2022 • from application 1.0 • Technical changes and errors excepted.
Position of the sun:
------------------------------
Defining position of sun via values:
Enter the range (direction and height) in which the sun must be located for the shading
to be active.
Defining position of the sun via directions:
Enter the direction in which the sun must be positioned so that the shading is active.
Slats and moving position (for shutters):
------------------------------
Start threshold value in klux
valid until 1st communication
0 … 100; 30
Type of limit value change
• Absolute value with a 16bit comm. object
• Lifting/lowering with a comm. object
• Lifting/lowering with two comm. objects
Hysteresis threshold in
percent (%) • kLux
Hysteresis (in %)
0 ... 100; 10
Hysteresis (in kLux)
1 ... 120; 20
Increments in klux
(only when "lifting/lowering with comm.
object")
1 … 5; 2
Drive up delay in min
0 … 255; 12
Drive down delay in min
0 … 30; 1
Send current shading status
no • yes
Assess position of the sun
no • yes
Assess position of the sun
yes
Position of the sun is defined via
• Discreet value of azimuth and elevation
• Directions
(regarding azimuth and elevation)
Position of the sun is defined via
discreet value
of azimuth and elevation
Azimuth from
0 … 360
Azimuth to
0 … 360
Elevation from
0 … 90
Elevation to
0 … 90
Position of the sun is defined via
directions
(regarding azimuth and elevation)
Directions
• East (azimuth: 0° … 180°)
• South east (azimuth: 45° … 225°)
• South (azimuth: 90° … 270°)
• South west (azimuth: 135° … 315°)
• West (azimuth: 180° … 360°)