39
Parameter setting
Actuator KNX S1R-B4 compact
• Version: 12.09.2022 • from application 1.0 • Technical changes and errors excepted.
Input as brightness encoder:
If the input is assigned and shall be used as a brightness encoder (e.g. threshold value
of a sun sensor), select "brightness encoder" and specify which value will be sent.
The input can be blocked using a blocking object. For active blocking there is
no bus
communication
.
Input for scene control:
If scenes are called and saved with the input, then choose the "Scenes" bus function
and specify the saving, time difference (call/save) and scene number.
The input can be blocked using a blocking object. For active blocking there is
no bus
communication
.
Input as actuator button
If this channel is used for the input to the control of the drive, then specify the button
function and the control mode.
*A detailed description of the setting options for the individual control modi can be
found in the chapter
Control modi for drive control
Function
Brightness encoder
Brightness in klux
0...100; 20
Use blocking object
No • Yes
Function
Scenes
Button operation
• without saving
• with saving
Time between calling and saving in 0.1
seconds
(only if selected "with saving")
1...50; 20
Scene No.
0...127
Use blocking object
No • Yes
Button function
Up • Down
Up • Down • Up/Down
Retract • Extend •
Retract/Extend
Close • Open •
Close/Open
(blind)
(shutter)
(awning)
(window)
Control mode*
• Standard
• Standard inverted
• Comfort mode
• Dead man's switch
