23
Parameter setting
Actuator KNX S1R-B4 compact
• Version: 12.09.2022 • from application 1.0 • Technical changes and errors excepted.
16 bit input object:
Block – rain blocking
The menu item only appears if a rain blocking was configured for "control". The input
object "rain blocking" is linked with the output object of a rain sensor.
Position in % (only if by using a block, a
specific position is achieved)
0...100
Slat position in % (only if by using a block,
a specific shutter position is achieved)
0...100
Waiting period in secure position in min
after blocking
1...255; 5
Behaviour after waiting period
For manual operation before and after
blocking
• no action
• move into last position
For automatic operation after blocking
follow automatic
Type of input object
16 bit
As of wind speed in m/s
blocking
2...30; 5
If blocking is active
• no action
• stop
• move into position
• up-command • down-command
(shutter/blind)
• retract-command • extend-command
(awning)
• close-command • open-command
(window)
Waiting period in secure position in min
after blocking
1...255; 5
Behaviour after waiting period
For manual operation before and after
blocking
• no action
• move into last position
For automatic operation after blocking
follow automatic
Send current blocking status
no • yes
