38
Parameter setting
Actuator KNX S1R-B4 compact
• Version: 12.09.2022 • from application 1.0 • Technical changes and errors excepted.
Input as dimmer:
If the input is used as a dimmer, select the bus function "Dimmer" and specify the
button function, time interval (switching/dimming) and if requested, the repeat interval
for a long button press.
The input can be blocked using a blocking object. For active blocking there is
no bus
communication
.
Input 8 bit encoder:
If the input is to be used as an 8bit encoder, select the "8 bit encoder" bus function and
specify which value will be sent.
The input can be blocked using a blocking object. For active blocking there is
no bus
communication
.
Input as temperature encoder:
If the input is used as a temperature encoder, then choose the bus function
"Temperature encoder" and specify which value between -30°C and +80°C will be sent.
By sending a temperature value, the target value of the temperature control may be
changed for example.
The input can be blocked using a blocking object. For active blocking there is
no bus
communication
.
Function
Dimmer
Button function
brighter • darker • brighter/darker
Time between switching and dimming
(in 0.1 s)
1...50; 5
Repeat the dimm command
no • yes
Repeat the dimm command
for a long button press
(if dimm command is repeated)
every 0.1 s • every 2 sec; every 1 sec
Dim by
(if dimm command is repeated)
1,50% • 3% • 6 % • 12,50% • 25% • 50%
Use blocking object
No • Yes
Function
8 bit encoder
Value
0...255
Use blocking object
No • Yes
Function
Temperature encoder
Temperature in 0.1°C
-300...800; 200
Use blocking object
No • Yes
