130
Control System WS1 Color / WS1000 Color
• Version: 14.12.2016 • Technical changes and errors excepted.
7.1.
Care and maintenance
Maintenance of the weather station
WARNING!
Risk of injury caused by components moved automatically!
The automatic control can start system components and place people in
danger (e.g. moving windows/awnings if a rain/wind alarm has been
triggered while cleaning).
•Always isolate the device from the mains for servicing and cleaning.
The device must regularly be checked for dirt twice a year and cleaned if necessary. In
case of severe dirt, the sensor may not work properly anymore.
ATTENTION
The device can be damaged if water penetrates the housing.
•Do not clean with high pressure cleaners or steam jets.
Maintenance of the control unit
Finger marks on the touch screen are best removed with a damp cloth or a microfiber
cloth. You can wipe the buttons without activating them.
Do not use abrasives / detergents or aggressive cleaners for cleaning.
If there is a power outage, the data you have entered will be saved for around 10 years.
No battery is required for this. Once power is restored, the clock must be set again. If
there is time signal reception this takes place automatically.
7.2.
Technical specifications
7.2.1. Technical specifications Control Unit
WS1 Color
Housing
Plastic material (partially painted)
Colours
• White glossy (similar to RAL 9003 Signal White)
/ light grey (similar to RAL 7035 Light Grey)
• Aluminium (similar to RAL 9006 White Aluminium)
/ graphite (similar to RAL 7024 Graphite grey)
Mounting
Flush/cavity wall
Dimensions
Central unit approx. 164 × 121 × 29 (W × H × D, mm),
concealed box approx. 152 × 95 × 62 (W × H × D, mm)
Ambient temperature
Operation 0…+50°C, Storage -30…+70°C,
avoid bedewing
Operating voltage
230 V AC, 50 Hz
Summary of Contents for 60121
Page 7: ...6 Clarification of signs ...
