55
Automatic settings
Control System WS1 Color / WS1000 Color
• Version: 14.12.2016 • Technical changes and errors excepted.
Alternatively, the automatic function can be reactivated at a set time following a man-
ual intervention.
Switching on: To perform an Automatic Reset after a manual intervention, select
Yes
.
Switching off: To switch off the heating’s Reset function, select
No
(this is the default
setting).
Confirm your setting with the
OK
button.
Automatic Reset time and/or period can be set.
System > Automatic Settings > General Settings > Automatic Reset
3.3. Define automatic reset
3.1.9. Automatic air-conditioner settings
For connected coolings/air conditioners the following automatic settings can be
changed:
•
Indoor sensor to be used for the air-conditioner
•
Indoor day temperature
•
Night mode (period) and indoor night temperature
•
Enable/Disable automatic reset
As soon as a cooling/air-conditioning unit is activated, windows will be closed and
ventilators switched off. The delay time applicable to this can be set.
System > Automatic Settings > General Settings > Ventilation Block
3.3. Adjust ventilation block
The automatic climate control functions can be accessed by pressing the buttons:
Now you can select individual air conditioners and adjust their settings. For each air
conditioner the following settings can be changed:
Press the button to select the indoor sensor the control system will use for this cooling
unit (Pre-setting: Internal sensor at WS1, first sensor in the list at WS1000). For as long
as “
No sensor
” is selected, the indoor sensor will not be taken into account for control
of the cooling unit, i.e. no automatic control will take place.
Confirm your setting with the
OK
button.
Automatic
Settings
Air conditioner
System
Sensor Selection
Summary of Contents for 60121
Page 7: ...6 Clarification of signs ...
