110
Basic Setting
Control System WS1 Color / WS1000 Color
• Version: 14.12.2016 • Technical changes and errors excepted.
Output type
Press the
Reserve
button. The possible output types appear (heating, air-conditioner,
ventilator, light, roof gutter heating, alarm, dimmer). Select as appropriate. You can
test the relay function with the
Close
button. If a multifunctional output is not being
used for the moment, leave “Reserve."
Confirm your selection with the
OK
button.
Name
Press the button to change the name. Enter the desired name via the keypad that ap-
pears.
2.4. Input keyboard for names and codes
Confirm your input with the
OK
button.
6.1.5. Set up multifunctionals inputs
To the multifunctional inputs you can connect:
•
alarm signal (motion or smoke detectors)
•
climate indicators (e.g. a climate/heating unit that is independent of the control
•
safty contacts
•
close-contacts (for sliding doors)
•
impulse for automatic reset
•
signal for activation of the camera picture (binary input)
Specify here which devices are connected to the individual inputs.
When a
motion-detector alarm
is triggered and a sensor signal recognised, all win-
dows connected to the control unit will be closed. After 5 minutes without a new sensor
signal the control unit switches back to normal operation.
7.3. Messages in the weather data display
The
fire alarm
activates various safety measures: awnings, blinds and shutters retract
in order to clear an escape route, the light comes on, heatings and air-conditioning
units switch off, windows and ventilators are opened or switched on. While the fire
alarm is triggered an acoustic warning signal sounds at the control unit. The fire alarm
can only be switched off by a Reset/Restart of the control system through the
System
> WS1 / WS1000 Settings > Service > Reset menu
or by cutting off the power sup-
ply.
7.3. Messages in the weather data display
Reserve
Name 1
Summary of Contents for 60121
Page 7: ...6 Clarification of signs ...
