52
SECTION 4
OPERATING THE STAINER
4.1 Operating Instructions
Performing a Stain Cycle (continued)
3
If you have created a stain program, and it appears
on the display, proceed
to Step 4. If the desired program does not appear on the display, select
Programs
. Then select the desired program and proceed to Step 4.
4
Select
Start
. The display shows the progress of the program, and a signal
tone (if enabled) indicates the end of the cycle.
NOTE:
Use the emergency Stop button when required, for example, if there is
abnormal vibration or noise. This will abort the staining cycle.
Unloading the Carousel
WARNING!
Treat slides in accordance with good laboratory practices and local
regulations.
1
Remove the carousel from the bowl and place it on a solid, level surface.
2
Remove the carousel lid by pressing the button and lifting the lid.
3
Carefully remove each slide and read the results using a microscope.
