Elite 5701N, Manual

Page: 34 / 43

14. Tank pressure: Tank pressure value, glue output condition write into column, used for recording
15. Standard glue amount selection: Select glue weight parameter, select valve H1, H2, renew parameter function button
16. Perform standard weighing: Construct backup parameters, will input parameter according to 5-16 column value
Input weighed value
17. Balance homing: Install COM4 precise balance function, if not installed, Balance function button is inverse gray
18. Balance calibration: Precise balance homing, if not installed, Balance function button is inverse gray
19. Delete: delete backup information button
20. Remark: Can be used to record which type of machine is used
。
21. Cleaning before auto dispensing: Click to open
Hardware instructions
1.H1 valve, H2 valve pressure value 2.Precise Balance is modelled by above, use 0.000 as unit
3. Needle information 4. Feed out glue to balance
H1 H2