Elite 5701N, Manual

Page: 2 / 43

1. Select M10_Laser Z axis height detection base
2. Open laser height detection interface
3. Turn on laser bean
4. Move X.Y. axis, align with customed target as right Pic. 1
5. Revise coordinate
Pic. 1
M11_CCD alignment :M10 Laser Z axis height detection base
When to use: Working position and actual position height detection point is different, Base height
detection and actual height is different
1.
Select M11_CCD alignment:M10 Laser Z axis height detection base point
2.
Turn on CCD light source
3.
Move X.Y. axis, align with customed target as below Pic.1
4.
Revise coordinate
5.
Open Laser height detection interface
6.
Perform height detection base height on M10 coordinate position and update M10 laser Z axis height detection value.
7.
Red disk shows up, left key to save system file
4
1
2 4
3
5
6
6
7