Elite 5701N, Manual

Page: 29 / 43

to 1500. Pic.5
14. Turn valve On delay, the shorter the negative value glue amount, the longer the positive value glue amount. Pic.5
15. Start valve On delay, the longer the negative value glue amount, the shorter the positive value glue amount. Pic.5
Adjust dispense parameter
Target Size, Use needle size or dispense target setting as base
Below interface parameter is screw valve dispense, can be used at needle valve and air pressure valve
Teach.
Dispense speed setting.
Right Pic. is performance
under different dispense
speed. The lower the speed
is, the more the glue amount
is
Speed=130 Speed=135 Speed=140
Base
，
Start point valve On delay
Right Pic. is performance
under different delay. The
lower the delay is, the more
the start point glue amount is
Delay=-50 Delay=0 Delay=50