Elite 5701N, Manual

Page: 28 / 43

H1_Dispense Test
Save as new file, Construct dispense program, adjust glue parameter
1. Conveyor belt clamp, Pic. 1
2. Right mouse key to use save as new file function, Construct Cpk_H1_Line Pic.1 Pic.3
3. Select Edit Pic.2
4. Input Start 1 to most 16 working point Pic.2
5. Delete all workingn points Pic. 2
6. Select Teach, Dispense modePic. 1
7. Move to dispense platform left 9 position using CCD, initially write in L type, Presss keyboard F6 or New interface,
construct dispense working point Pic.4
8. CCD inteface right mouse key, Can use X or Y axis fixed distance moving Pic.1
9. Input value um as unit, can move in fixed distance towards X or Y direction Pic. 1
10. Dispense end point needs to be revise to END, for example: Select N6, Click Revise end point, click revise, 300 revises
to END, Pic.1
11. Red line is dispense route, Dotted line is add empty Run, Pic 4
12. Base Dispense height setting, the higher the value the more the glue amount. Initial set to 500. Pic.5
13. Dispense End distance, the shorter the negative value glue amount, the longer the positive value glue amount. Initial set
1
1
2
2
3
4
Pic.1
Pic.2
Pic.3
8
9
9
Pic.4 Pic.5
5
5
10
9
12
1
7
13
14
15
Dispense