Elite 5701N, Manual

Page: 19 / 43

M2_machine XY Jig CCD origin
When to use: Renew X.Y hardware for example motor screw and others, Working file base position move
at fixed direction, Can use M2 coordinate to revise direction, and therefore can move all working files to
correct position**Can only be use when all working filess moving is in fixed position ***
1.
Select M2_machine XY Jig CCD origin
2.
Turn on CCD light source
3.
Move X.Y axis, align CCD with jig origin, like below Pic. 1
4.
Revise
5.
Red disk will show up, click left key of mouse to save system file
Pic. 1
1
4
5
2