Elite 5701N, Manual

Page: 15 / 43

Pic. 1
3-1 Right needle will perform down
needle height detection light off
according to M3 coordinate
3-2 Detect needle height, height
detection light ON
5.
Select M7_dispenser base, click CCD move to coordinate position
6.
Select M9_Z axis base height, click Z axis move down
7.
Click dispense(Dispense time will view the first dispense time in teach mode as base.)
8.
Select M8_CCD base align with M7 dispenser base
9.
Turn on light source, move X.Y axis, CCD align with glue amountposition
10.
Adjust target size, adjust initial value to target size too.
11.
Revise coordinate
5.6.8
7
10
10
11
10
7
5 6
7