ElektroPhysik 23
4.
Now take readings by placing the probe on
the unknown coating and raise it after the
bleep.
Read off the thickness value.
5.
It may be necessary to delete the ZERO
calibration if, for example, an incorrect zero
value is entered. In this case:
a)
press ZERO and then CLEAR to delete the
zero calibration and any existing CAL
calibration.
Note:
-
This will reactivate the default standard
calibration for use on even surfaces.
-
ZERO calibration deletes an already existing
CAL calibration.
One-point calibration without foil
