10 ElektroPhysik
2.4
Basic gauge settings
1.
Switch off the gauge, hold down the ZERO
key and press ON.
2.
Keep both keys pressed until you hear the
signal. The gauge will now display a pair of
numbers: 1:0 or 1:1.
Note:
If you are using a MiniTest 600 FN, use the arrow
keys to activate the F section (
ñ
) or the N section
(
ò
) or wait 3 seconds until switching between
sections is performed automatically.
3.
Press ZERO to move through each of the
table’s function from 1 to 4. Use the arrow
keys to set the option 0 or 1.
4.
Press ZERO again to return to measuring
mode.
Basic gauge settings
