ElektroPhysik 13
2.4.3 Activating/deactivating the LC display
light (optional)
A switch-on LC display lamp can be supplied as an
optional extra. When activated, it lights the display
for about 2 sec after a reading has been taken.
Please remember that using the lamp requires ex-
tra power.
To activate the display light please refer to the table
of gauge settings in section 2.4. Select option with
the ZERO and arrow keys as described.
2.4.4 Select a measuring unit
‘metric’ - ’inch’ (imperial)
Readings can be taken and displayed in metric and
imperial units. To switch from metric units (µm, mm,
cm) to imperials (mils, inch) or vice versa, please
refer to the table of gauge settings in section 2.4.
Select option with the ZERO and arrow keys as
described.
LC display light and selection of measuring unit
